2017 Grasshopper 721DT

Selling Price -

$7,300.00

721DT 52" Rear Discharge PowerFold deck

Information

2017 Grasshopper 725DT 52"

Offering powerful performance for a wide range of grounds maintenance tasks, the Model 725DT provides the speed, durability and versatility you need for year-round profitability

Features may include:
  • Built for Long Life

Robotically-welded, high-grade steel construction and I-beam reinforcement for long-lasting durability

Centered-bearing design provides greater load-bearing capacity to easily handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts

Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance

  • T6® Drive Hydrostatic Transmission

Tandem 16cc Parker pumps-in-reservoir transmission with design-matched Parker high-torque wheel motors

In-line CoolFan™ cooling system for cooling efficiency and long service intervals

Delivers smooth response and requires less maintenance, with industry-leading 1,000-hour fluid change interval

  • QuikConverter™ Implement Capability

Add or remove implements in minutes without tools with QuikConverter™ Implement System

Equip your out-front mower with a wide range of tools, including turf cleanup, renovation and snow removal implements that extend your productivity year-round

  • Minimal Maintenance

Fewer than 10 grease points and easy top-side access to belts and filters

1,000-hour transmission fluid change intervals

Self-tensioning belts minimize cost and labor on routine maintenance

  • Heavy-duty Deck

Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge

Specially designed cutting chambers enhance airflow for better cut quality

Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength

Spindle planes fabricated from double-layered, 7-gauge plus 10-gauge formed steel laminate that is 0.3138 inch thick 25.5 percent thicker than ½-inch steel

Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion

  • PowerFold® Electric Deck Lift

Standard on all FrontMount™ DuraMax® decks 48-inch and larger, PowerFold® is the zero-turn mower industry's first electric deck lift

PowerFold® rotates the deck nearly 90 degrees to provide easy access to the underside of the deck for simplified maintenance and mulching package installation, plus space-saving portability and storage

The feature also adjusts cutting height between 1.0 and 5.0 inches and controls deck lift functions using a single switch

  • Vigilant Operator Presence System™

Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt

Dampened steering levers that return to neutral from forward and reverse

Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position

  • Ultimate Operator Station®

ComfortZone™ seat eliminates jostles and jolts with coil-spring suspension and a fully padded, high-back seat, padded armrests and variable density foam cushion. Iso-mounting smooths the ride, erases fatigue and keeps the operator comfortably in control at faster mowing speeds

Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach

One- or two handed operation with QuikAjust Tilt™ dual levers with 9-inch comfort range to custom fit operator's reach. Levers automatically return to neutral from either forward or reverse position and are less strenuous than riding mowers with steering wheels



Photos

Highlights

  • $7,300.00
  • Kerens
  • Pre-Owned
  • In Stock
  • 6014
  • 2017
  • Grasshopper
  • 721DT
  • Kubota 3-Cyl
  • 215
  • Construction (Robotic-welded steel): Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. 7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in s
  • T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator | Filtration/Hydro Fluid: Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals
  • Diesel
  • Available
  • Side Discharge: 65.5 in. (166.5 cm) | Mulch: 53.5 in. (135.9 cm) | FrontMount PowerUnit Only: 50.0 in. (127.0 cm)
  • Cutting Range: 1.0 to 5.0 in. (2.5 to 12.7 cm) | ROPS: 69.0 in. (175.3 cm)
  • 52
  • Fabricated

Specifications

  • 2017
  • Grasshopper
  • 721DT
  • Base
  • Riding
  • Kubota, 3-cyl.
  • 43.9 cu. in. (719 cc)
  • Pressure Lube/Filter
  • Liquid
  • Heavy-duty, remote mounted, cyclonic, dual element air filtration
  • Assemblies: Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion | Housings:8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern
  • Solenoid shift
  • Breakerless, diesel quick heat glow plug
  • T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator | Filtration/Hydro Fluid: Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals
  • One- or two-hand operation with adjustable, Hydra-Smooth™, dual levers that automatically return to neutral from either forward or reverse position
  • Attachment: Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake
  • maintenance-free: 12 Volt
  • Diesel - No. 2
  • Construction (Robotic-welded steel): Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. 7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in s
  • Dynamic braking through hydrostatic transmission
  • Disc parking brakes, one for each drive wheel
  • Drive Wheels - Standard (4-ply rated): 22x11.00x10 bar tread, high flotation, 4-ply rated
  • Single Tail: 13x6.50x6 rib tread, pneumatic (2)
  • Deck Tires (4-ply rated): 9x3.50x4 (flat proof), 4-ply rated
  • FrontMount Power Unit: 51.5 in. (130.8 cm)
  • AntiVibe PowerPlatform™ with iso-mounted seat and footrest
  • Crankshaft: Horizontal | Muffler: Ultra quiet, single, industrial type | Interlock System: Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral
  • Blade Drive: Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning
  • Ultimate Suspension Ride (USR) iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered premier suspension seat
  • Forward: 0 - 9.0 mph (0 - 14.5 kph) | Reverse: 0 - 6.0 mph (0 - 9.7 kph)
  • DURAMAX® DECK Size: 52" Deck | Trimability(Outside of std. tire to left trim side): 1.0 in. (2.5 cm) | Deck Raised - Flipped: 88.5 in. (224.8 cm)
  • Cutting Range: 1.0 to 5.0 in. (2.5 to 12.7 cm) | ROPS: 69.0 in. (175.3 cm)
  • Tempered, alloy steel: (3) 18 in. (45.7 cm)
  • True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point
  • Back: 46.0 in. (116.8 cm) | Cushion: 30.5 in. (77.5 cm)
  • FrontMount w/ DuraMax Deck®: 105.5 in. (268.0 cm) | FrontMount Power Unit + DuraMax Deck®: 88.5 in. (224.8 cm) | FrontMount PowerUnit Only: 67.0 in. (170.2 cm)
  • Side Discharge: 65.5 in. (166.5 cm) | Mulch: 53.5 in. (135.9 cm) | FrontMount PowerUnit Only: 50.0 in. (127.0 cm)
  • 8 U.S. Gal (30.28 l)
  • Uncrated: 1335 lbs. (605.5 kg) | FrontMount Power Unit Only: 965 lbs. (437.7 kg) | FrontMount Deck Only - Side Discharge (uncrated): 370 lbs. (167.8 kg)
  • Console-mounted Instruments: Low engine oil pressure, alternator, temperature and parking brake warning lights, engine temperature and volt gauges, digital hour meter, work lights, ignition, glow plug and push/pull PTO switches | Hour Meter: Standard
  • 52
  • Fabricated